Skip to main content
Loading...

Vortech Driver Holder


Rating:
Average: 5 (3 votes)
(0 reviews)

Made with 1/4" clear acrylic

$15.00


SKU:
12013AA

The new design requires you to disassemble the driver unit's four screws and slide the power cord through the hole in the bottom of the bracket one-time during installation.

If you are tired of Vortech drivers coming off the wall, here's a way to secure it to the wall or stand more permanently.

Screw the acrylic bracket to the wall or cabinetry, then set the driver in place so it rests on the footer. A small piece of velcro on the back of the driver will keep it in place against the acrylic bracket, despite gravity. The Vortech Driver holders have a new and improved design! The curved lip follows the sleek lines of the driver perfectly, allowing for cleaner lines and a better overall appearance. 

*NOTE: The new design requires you to disassemble the driver unit's 4 screws and slide the power cord through the hole in the bottom of the bracket. This is a very simple step that shouldn't cause you any issues whatsoever. If you're updating to the new Quiet Drives, they come disassembled anyway, so just be sure to slip the power cord through before you screw it together. 

Single bracket holders are $15 each
Double bracket holders are $25 each
Triple bracket holders are $35 each
Quadruple bracket holders are $45 each

These no longer come with melevsreef.com etched in the acrylic. The base piece is clear acrylic without markings.

ParameterValue
Size
Color
Waist
Length

Add Review

5