Ecotech Products

Ecotech Marine Vortech pumps, Radion Lighting, Cg glue, Battery Backup, Reeflink and other related parts

Vectra M1 Pump


Centrifugal Pump

Quiet Operation
Cost Savings
Active Feedback

When used with the ReefLink, your Vectra pump can send you performance and
status alerts right to your moble device or computer. Your return pump is the heart of
your aquarium. The faster you hear about an unexpected issue, the more successful
you will be as an aquarist. 


Mp10 Foam Guard


Use a Foam Guard to keep fish and anemones out of your Vortech pumps.  This size is for the Mp10 Vortech series.


Multi-Light RMS

Multi-Light RMS for two XRw15 Radions over a 40g breeder

Mounting Solution for Multiple Radion LED lights


Built-in cable management
Compatible with rimmed, rimless, and eurobraced tanks
Extremely rigid and light
Anodized Aluminum Finish
Flexible slide mounts allow for you to move and rotate your
Radion position to perfectly illuminate your corals
Mounts Radions optimally at approximately 7 inches 18cm above glass

Included in this order:


Vortech RF Module Upgrade


If your Vortech driver isn't the wireless model, you can install this RF Module yourself in a few minutes and communicate with the pump wirelessly via EcoSmart Live with Reeflink -- or the Apex WMX module.

This upgrade is for the Mp10ES and Mp40ES pumps. 


Vortech QuietDrive Upgrade


If you own Vortech pumps using the white ES driver, you can upgrade those now to the new QuietDrive driver. Changing them out will only take a few minutes, and immediately you'll hear the difference. It's actually incredible how quiet they run with the new technology employed, and I've heard it in person. 

Be sure to select the correct driver for your pump, as each one is matched up.  Works for Mp10wES, Mp40wES and Mp60w ES pumps.

More information can be read here:

Mp10wES to Mp10wQD Upgrade: $50
Mp40wES to Mp40wQD Upgrade: $75
Mp60wES to Mp60wQD Upgrade: $100


New Design! Vortech Driver Holder

NEW & Improved Vortech Driver Holder
NEW & Improved Vortech Driver HolderNEW & Improved Vortech Driver HolderVortech Driver Holder- Old StyleVortech Driver Holder- Old StyleVortech Driver Holder- Old Style Vortech Driver Holder- Old StyleDual Vortech Driver HolderVortech Driver HoldersVortech Driver Holders

If you are tired of Vortech drivers coming off the wall, here's a way to secure it more permanently.  Screw the acrylic bracket to the wall or cabinetry, then set the driver in place so it rests on the footer. A small piece of velcro on the back of the driver will keep it in place, despite gravity. As of June 2015 the Vortech Driver holders have a new and improved design! The curved lip follows the sleek lines of the driver perfectly, allowing for cleaner lines and a better over all appearance. 

*NOTE: The new design requires you to disassemble the driver unit's 4 screws and slide the power cord through the hole in the bottom of the bracket. This is a very simple step that shouldn't cause you any issues whatsoever. If you're updating to the new Quiet Drives, they come dissassembled anyway, so just be sure to slip the power cord through before you screw it together. 


Radion XR15w PRO


The Radion LED lighting lineup just added a new model this month.  This one is built for Nano setups: 7" x 7" x 1.5" will cover a 24" x 24" area perfectly using 85 watts of power!

Brilliant Color, Perfect Size.

Compact and powerful, the XR15w Pro is specifically designed to
meet the lighting requirements of the most popular marine tank
sizes. The XR15w Pro is also fully programmable with seamless
EcoSmart Live integration. 


• Full spectrum + UV
• Output optimized for coral growth
• Preconfigured outputs matching popular Kelvin ratings
• Perfect for recreating natural lighting conditions 




ReefLink provides completely wireless access to the world of EcoSmart Live, the web-based aquarium command center from EcoTech Marine.  

ReefLink enables a continuous real-time connection with EcoTech equipment via Control EcoTech reef aquarium equipment from your computer or tablet — anywhere, any time.

ReefLink is easy to set up. Just place the ReefLink anywhere within range of your WiFi router, and power it on. Then forget about it. No wires. No adapters. No worries.

More details:


Vortech Mp60w EcoSmart (out of stock)


If you looking for plenty of flow in a big reef tank the MP60w ES Vortech will do it beautifully and quietly.  My 400g reef is powered with two of these pumps, plus an Mp40w ES for cross flow beneath the returns.

Add a Reeflink for for $99!


Cg Coral Glue - 75ml


Ecotech Marine's larger bottle of Cg coral glue, measuring 75ml.  This excellent glue will bond SPS, Zoas and other corals to frag plugs or directly to the rockwork.  

You can use this bottle underwater, if you don't release your grip and allow saltwater to suck back into the bottle. Maintain pressure and remove from the bottle from the tank, then release your grasp.

Store Cg in the fridge when not in use to extend shelf life.

Syndicate content