I build a lot of acrylic products for my customers, and take pride in my work. This is dosing reservoir that was recently ordered, and it came out really nicely. Each zone holds 1g of solution, such as Alkalinity + Calcium + Magnesium + Acropower perhaps. Dimensions are as follows: 21.25" long x 5" deep x 12" tall. I used a blue base for a nice look that matches the custom Sump and Top Off Reservoir the buyer ordered.
A customer requested I build a fan bracket that fits her rimless sump, so I designed something different that the CNC could cut out. I also changed the order of gluing joints, and I think overall it's a nicer looking final product. This is a single fan holder, and a 120mm fan drops into that spot. I usually build double fan brackets. Small 1/4" notches were cut to fit over the vertical walls of a rimless sump.
I've been using Phosphate Rx for a decade, and it's my preferred product to keep PO4 levels under control. No GFO for me. I've mentioned it many times, but decided "I guess I need to do a video about this product after all." I do realize I could have explained the process in about sixty seconds because it's that simple, but I wanted this to be a fun video. Hope you liked the flashback.
Purchase Phosphate Rx here: http://melevsreef.com/product/phosphate-rx
Years ago, I came up with an acrylic bracket to keep food in the display tank instead of letting it float across the surface and into the overflow (thus down into the sump, wasted and uneaten). I called it the Eheim Chimney, as it was made to fit the Eheim Autofeeder system. Turns out it fits the Apex AFS just as nicely. I usually suggest the person simply put it on top of the overflow box since that's a great place where it won't be knocked off into the tank. If the overflow box doesn't have a lid, I can make that as well.
While every fan tray I build is custom made to fit a particular sump, this one took more time and a little imagination to fit one customer's needs. This bracket will fit on a rimless sump, nestling down on the front wall and the inner partitian and stay there. I added a front and back piece to hug the spot so it won't be going anywhere accidentally.
It holds two 120mm fans, and is made of 1/4" clear acrylic. It actually took more time than it should have, but that's the nature of creativity versus a cookie-cutter product. I kinda like it. :)
When it comes to cutting up corals, there are hand tools, and then there are time-savers like a table top bandsaw. The Gryphon C-40 AquaSaw is something I purchased over two years ago at MACNA, and only opened it up for the first time two weeks ago. I thought I'd do an unboxing video, but that never happened. When I was recently in the midst of fragging colonies, I opened up the box, put it together, plugged it in and was instantly impressed with how well it worked. Cutting away dead skeleton, creating small frags from larger colonies of montipora and chalices, it kept up beautifully.
Earlier today, the SmartATO began beeping while I was working at my desk. Thinking nothing of it, I ignored it for about 4 minutes while I wrapped up what i was doing. When I went over to unplug it, I saw a small flood in the fishroom and grabbed my camera. The cause of this was by a quick-disconnect I shorted out a week ago, and hadn't fixed yet. I tried to fix it, got frustrated and blew it off. You know what happens when you leave something unfixed on a reef, right? Well...
One of the topics I wanted to address as a full video is biopellets. Short answer: they work. Earlier this year, nitrates spiked in my reef and despite lots of effort it didn't get them down and keep them down, so I opted to get biopellets running again on my 400g reef. The results were spectacular, as expected.
It's those little things that make life more enjoyable right? Here's something new I'm very proud of, a good looking coffee mug with my favorite website emblazoned on both sides. No matter how you hold it, you'll show your friends which website you turn to for knowledge and purchases. You can order mugs here: http://melevsreef.com/product/a-great-mug
After months of use, regular cleanings, minor adjustments and a full breakdown twice, I'm releasing my product review of the Nyos Quantum 300 protein skimmer. I love the look of it, but what pleases me most is how quiet it is. It's dead silent. Here's the full video, including breakdown.
And spoiler alert, I got another one for the frag system. This is the Quantum 120.