Replacement booster pump for the 150gpd Boosted RO/DI system sold by Melev's Reef
Properly rated booster pump (maximum pressure governed to 75 PSI)
24v Power Supply
1/4" diameter tubing Pressure Switch
This kit has no serviceable parts, and must be purchased as a whole. I do not offer individual components.
The pump should be installed to increase water pressure going to the membrane housing. It should not be installed before the entire RO system, but should be plumbed in before the membrane itself, AFTER the prefilter set. Membrane housings are made of PVC and can tolerate higher pressure. Acrylic housings are not rated for high pressure applications and shouldn't be overtaxed as this increases the risk of rupture and flooding.
This pump is sealed and has no serviceable parts. The booster pump should be installed before the membrane stage as that housing is made of PVC. Do not install the booster pump kit in front of the entire RO system because the acrylic housings are not designed to handle the additional PSI.