Top view of the canopy. Note the hinge was hidden. You might prefer to screw it flat on top.

The canopy opens, folding back and resting on the rear section. Lighting on both halves allows me to see when working on the tank. Both reflectors shield my eyes so I'm not looking into the bulbs.

The canopy rests on the plastic frame of the tank, and completely hides the plastic when closed.

This angle lets you see the single 55w bulb in the front half. The rear section has two 55w bulbs.

Not much to see, but the mirror allows you to see the back somewhat. Note that the rear corner's design. Same on both ends.

Side view from the left.

Rear view of canopy, as well as the rest of the tank.

Dimensions 31 7/8" long. 6" tall. 14.5" wide. Front section is 6 1/4" wide. Rear section is 8" wide. 30" brass piano hinge. A 3/4" x 3/4" rail was mounted inside the canopy on the sides and front. Glued and screwed, this is what rests on the aquarium frame, and supports the canopy. This was stained with Golden Oak stain, and varnished with an oil based polyurethane inside and out.